P1444
P1444 - Purge Flow Sensor Circuit Low Input
|
|
 |
Add Comment
|
Possible causes
- EVAP control system pressure sensor
- EVAP canister purge volume control solenoid valve (The valve is stuck open.)
- EVAP canister vent control valve
- EVAP canister
- Hoses (Hoses are connected incorrectly or clogged.)
- EVAP canister purge volume control solenoid valve (The valve is stuck open.)
- EVAP canister vent control valve
- EVAP canister
- Hoses (Hoses are connected incorrectly or clogged.)
Help with thisWhen is the code detected?
The canister purge flow is detected during the specified driving conditions, even when EVAP canister purge volume control solenoid valve is completely closed.
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1444 Description
This system controls flow rate of fuel vapor from the EVAP canister. The opening of the vapor by-pass passage in the EVAP canister purge volume control solenoid valve changes to control the flow rate. The EVAP canister purge volume control solenoid valve repeats ON/OFF operation according to the signal sent from the Engine Control Module (ECM). The opening of the valve varies for optimum engine control. The optimum value stored in the ECM is determined by considering various engine conditions. When the engine is operating, the flow rate of fuel vapor from the EVAP canister is regulated as the air flow changes.
P1444 Information for specific makes
Need more help?
Do you need more help with the P1444 code? ask a question to our users or search the top hand picked automotive forums for more information
or
or
Ask your facebook friends
Need parts?
Need parts to fix this code? Search hundreds of stores at the same time and compare prices
Help Engine-Codes.com
Help us improve Engine-Codes.com. Leave a comment below or tell us if the information above help you fix the code. What are symptoms is your vehicle for the P1444 code?
Have you replaced any parts? Any information is appreciated. Thanks