Engine-Codes - Lexus - P0014 Lexus

P0014 Lexus Code - Camshaft Position 'B' Timing Over-Advanced or System Performance Bank 1

- Code Popularity: 24,402 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents
ChatAC AutoCodes.com AI Chat

What are the Possible Causes of the DTC P0014 Lexus?

NOTE: The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
  • Low or Dirty Engine Oil
  • Valve timing
  • Faulty Camshaft Timing Oil Control Valve Assembly
  • Camshaft Timing Oil Control Valve Assembly circuit is open or shorted
  • Camshaft Timing Oil Control Valve Assembly circuit is open or shorted
  • Faulty Engine Control Module (ECM)

Code Tech Notes

If the engine oil is clean and the VVT and OCV circuits are OK, replace the VVT to resolve the problem.

⚠ Does your Lexus have Safety Recalls? → Check here

How to Fix the DTC P0014 Lexus?

Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.

Search for P0014 Lexus Questions and Answers: Search here →

What is the Cost to Diagnose the Code?

Labor: 1.0

The cost to diagnose the P0014 Lexus code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.

What are Code Possible Symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Lack/Loss of power
  • Engine rough idle

What Does the P0014 Lexus Code Mean?

The Variable Valve Timing (VVT) system adjusts the intake valve timing to improve driveability. The engine oil pressure turns the VVT controller to adjust the valve timing.
The camshaft timing oil control valve assembly is a solenoid valve and switches the engine oil line. The valve moves when the Engine Control Module (ECM) applies 12 V to the solenoid. The ECM changes the energizing time to the solenoid (duty-cycle) in accordance with the camshaft position, crankshaft position, throttle position, etc.
The ECM optimizes the exhaust valve timing using the Variable Valve Timing (VVT) system to control the exhaust camshaft. The VVT system includes the ECM, the camshaft timing oil control valve assembly and the VVT controller (camshaft timing exhaust gear assembly). The ECM sends a target duty-cycle control signal to the camshaft timing oil control valve assembly. This control signal regulates the oil pressure supplied to the VVT controller. The VVT controller can advance or retard the exhaust camshaft.

P0014 Lexus Code - Camshaft Position 'B' Timing Over-Advanced or System Performance Bank 1

Need more Information on the Code?

Need more information on how to fix the P0014 Lexus code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0014 Lexus code diagnosed by a professional: Find a repair shop in your area