P0158 TOYOTA
P0158 TOYOTA - HO2S22 Circuit High Voltage
|
Comments | Add Yours |
Possible causes
- Rear Heated Oxygen Sensor Bank 2 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection
- Faulty Rear Heated Oxygen Sensor Bank 2
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
- Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection
- Faulty Rear Heated Oxygen Sensor Bank 2
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
Tech notes
Replacing the rear O2 Sensor bank 2 usually takes care of the problem.
There is a factory service bulletin for the following Toyota models:
2005 – 2007 Toyota Avalon
2007 – 2008 Toyota Camry
2005 and 2007 Toyota Avalon, 2007 and 2008 Toyota Camry Service Bulletin OBDII Code P0158
There is a factory service bulletin for the following Toyota models:
2005 – 2007 Toyota Avalon
2007 – 2008 Toyota Camry
2005 and 2007 Toyota Avalon, 2007 and 2008 Toyota Camry Service Bulletin OBDII Code P0158
When is the code detected?
The P0158 code is set when the Engine Control Module (ECM) detects that the rear O2 sensor signal voltage remains excessively high for an extended period of time.
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust
- High Fuel Consumption
- Excessive Smoke from Exhaust
P0158 TOYOTA Description
The heated oxygen sensor 2 (HO2S), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. For optimum catalyst operation, the air fuel mixture (air-fuel ratio) must be maintained near the ideal stoichiometric ratio. The HO2S output voltage changes suddenly in the vicinity of the stoichiometric ratio. The Engine Control Module (ECM) adjusts the fuel injection time so that the air-fuel ratio is nearly stoichiometric. The HO2S generates a voltage between 0.1 and 0.9 V in response to oxygen in the exhaust gas. If the oxygen in the exhaust gas increases, the air-fuel ratio becomes Lean. The ECM interprets Lean when the HO2S voltage is below 0.45 V. If the oxygen in the exhaust gas decreases, the air-fuel ratio becomes Rich. The ECM interprets Rich when the HO2S voltage is above 0.45 V.
Need more help?
Do you need more help with the P0158 TOYOTA code? ask a question to all or users or search the top hand picked automotive forums for more information
or
or
Ask your facebook friends
Need parts?
Need parts to fix the P0158 TOYOTA code? Search hundreds of stores at the same time and compare prices
Help Engine-Codes.com
Help us improve Engine-Codes.com leave a comment below. Did the information help you fixing the P0158 TOYOTA code? What are the symptoms for the P0158 TOYOTA code?
Have you replaced any parts? Any information is appreciated. Thanks
