On most Chevrolet vehicles the sensor is on top of the fuel tank. The P0452 code may set when replacing the fuel filter, AutoCodes.com user recommends disconnecting the car battery before replacing the fuel filter.
Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
The cost to diagnose the P0452 Chevrolet code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.
The fuel tank pressure sensor measures vapor pressure or vacuum in the Evaporative Emission (EVAP) system. The Engine Control Module (ECM) supplies a 5 V reference and a low reference circuit to the fuel tank pressure sensor. The fuel tank pressure sensor signal voltage varies depending on EVAP system pressure or vacuum. The control module also uses this fuel tank pressure signal to determine atmospheric pressure for use in the engine-off small leak test, DTC P0442. Before using this signal as an atmospheric reference, it must first be re-zeroed. The Diagnostic Trouble Code (DTC) will be set if the fuel tank pressure sensor voltage is less than 0.15 V for greater than 10 s.
Need more information on how to fix the P0452 Chevrolet code? Get Access to Factory Service Manuals
Get the P0452 Chevrolet code diagnosed by a professional: Find a repair shop in your area