Before replacing any parts try cleaning all the Wheel Speed Sensors and sensor's gear, and clear the code. If the light comes back you may have to replace the sensor.
Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
The cost to diagnose the P0500 2008 Nissan Rogue code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.
The almost 0 km/h (0 MPH) signal from vehicle speed sensor is sent to ECM even when vehicle is being driven.
When the sensor rotor rotates, the magnetic field changes. It converts the magnetic field changes to current signals (rectangular wave) and transmits them to the Anti-lock Brake System (ABS) Actuator and Electric Unit (Control Unit). The vehicle speed signal is sent to the combination meter from the ABS Actuator and Electric Unit (Control Unit) by Controlled Area Network (CAN) communication line. The combination meter then sends a signal to the Engine Control Module (ECM) by CAN communication line.
Need more information on how to fix the P0500 2008 Nissan Rogue code? Get Access to Factory Service Manuals
Get the P0500 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area