Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
The cost to diagnose the P0505 2007 Toyota Highlander code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.
The idle speed is controlled by the Electronic Throttle Control System (ETCS). The ETCS is composed of the throttle motor, which operates the throttle valve, and the throttle position sensor, which detects the opening angle of the throttle valve. The Engine Control Module (ECM) controls the throttle motor to provide the proper throttle valve opening angle to obtain the target idle speed.
The ECM regulates the idle speed by opening and closing the throttle valve using the ETCS. The ECM concludes that the idle speed control ECM function is malfunctioning and set the Diagnostic Trouble Code (DTC) if:
1. The actual idle RPM varies more than the specified amount five times or more during a drive cycle
2. The learning value of the idle speed control remains at the maximum or minimum five times or more during a drive cycle.
Example: If the actual idle RPM varies from the target idle RPM by more than 200* rpm five times during a drive cycle, the ECM will turn on the MIL and will set a DTC.
Need more information on how to fix the P0505 2007 Toyota Highlander code? Get Access to Factory Service Manuals
Get the P0505 2007 Toyota Highlander code diagnosed by a professional: Find a repair shop in your area