Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
The cost to diagnose the P0694 code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.
The Engine Control Module (ECM) grounds the low-speed relay, which is the Fan Low relay, and the high-speed relay, which is the Fan High relay, control circuits through an internal solid-state device called a driver. The primary function of the driver is to supply the ground for the component being controlled. Each driver has a fault line that is monitored by the ECM. When the ECM is commanding a component ON, the voltage potential of the control circuit should be low, near 0 volts. When the ECM is commanding the control circuit to a component OFF, the voltage potential of the circuit should be high, near battery voltage. If the ECM detects that the actual state of the control circuit does not match the expected state, a Diagnostic Trouble Code (DTC) will set.
Need more information on how to fix the P0694 code? Get Access to Factory Service Manuals
Get the P0694 code diagnosed by a professional: Find a repair shop in your area