Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
The cost to diagnose the P0706 Acura code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.
The Transmission Range Switch is attached to a control shaft. Operating the shift lever makes the control shaft rotate via the shift cable. The shift position indicator shows which position is selected according to the Low/High signal combinations, which vary based on the control shaft rotational angle. The control shaft changes the position of the transmission range switch, activates the manual valve, and switches hydraulic pressure to shift the transmission through forward/neutral/reverse. The transmission range switch signal is used to determine the shift schedule. The voltage is high (5 V or 12 V) at the Powertrain Control Module (PCM) input terminal when each transmission range switch position is open, and it is low (0 V) when each switch is closed. If the FWD switch stays open while the vehicle repeatedly accelerates to a specified vehicle speed and then stops despite being in D or S, the PCM detects a malfunction in the transmission range switch (open) and stores a Diagnostic Trouble Code (DTC).
Need more information on how to fix the P0706 Acura code? Get Access to Factory Service Manuals
Get the P0706 Acura code diagnosed by a professional: Find a repair shop in your area