Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
The cost to diagnose the P0717 Cadillac code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.
The Input Speed Sensor detects the primary pulley revolution speed and sends a signal to the Transmission. The Input Speed Sensor (ISS), also known as the transmission turbine speed sensor, is a hall-effect type sensor. The ISS mounts to the control valve upper body assembly and connects to the control solenoid (w/body and Transmission Control Module (TCM)) valve assembly through a wire harness and connector. The sensor faces the 1-2-3-4 and 3-5-R clutch housing machined teeth surface. The sensor receives 8.3-9.3 volts on the Input/Output Speed Sensor (ISS/OSS) supply voltage circuit from the Transmission Control Module (TCM). As the 1-2-3-4 and 3-5-R clutch housing rotates, the sensor produces a signal frequency based on the machined surface of the 1-2-3-4 and 3-5-R clutch housing. This signal is transmitted through the ISS signal circuit to the control solenoid (w/body and TCM) valve assembly. The control solenoid (w/body and TCM) valve assembly uses the ISS signal to determine line pressure, transmission shift patterns, Torque Converter Clutch (TCC) slip speed, and gear ratio. The Diagnostic Trouble Code (DTC) will be set when the TCM detects turbine speed is less than 61 RPM and the output speed is greater than 500 RPM for 1 s.
Need more information on how to fix the P0717 Cadillac code? Get Access to Factory Service Manuals
Get the P0717 Cadillac code diagnosed by a professional: Find a repair shop in your area