P0750 Ford - Shift Solenoid 1 Circuit Malfunction
- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid 1 valve
- Shift solenoid 1 valve harness or connectors
- Shift solenoid 1 valve circuit is open or shorted
When the a transmission solenoid is malfunction, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is very dirty, it is recommend changing the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a transmission mechanical failure and that the transmission will need to be rebuilt or replaced.
When is the code detected?
The P0750 code is detected when TCM detects an improper voltage drop when it tries to operate the solenoid valve.
- Engine Light ON (or Service Engine Soon Warning Light)
- Transmission will not shift gears.
P0750 Ford Description
Shift solenoid valve 1 is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.
Need more help?
Do you need more help with the P0750 Ford code? ask a question to our users or search the top hand picked automotive forums for more information
FORD Technical Service Bulletins for P0750 code
1999 FORD WINDSTAR Unknown Or Other Details
Repair Shops Around Your Area
Need parts to fix this code? Search hundreds of stores at the same time and compare prices
Help us improve Engine-Codes.com. Leave a comment below or tell us if the information above help you fix the code. What are symptoms is your vehicle for the P0750 Ford code?
Have you replaced any parts?
Any information is appreciated. Thanks