What are the Possible Causes of the DTC P1445 Infiniti?
NOTE: The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes.
Faulty EVAP control system pressure sensor
Faulty EVAP canister purge volume control solenoid valve (The valve is stuck open.)
Faulty EVAP canister vent control valve
Faulty EVAP canister
Hoses (Hoses are connected incorrectly or clogged.)
⚠ Does your Infiniti have Safety Recalls? → Check here
How to Fix the DTC P1445 Infiniti?
Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
Search for P1445 Infiniti Questions and Answers: Search here →
What is the Cost to Diagnose the Code?
Labor: 1.0
The cost to diagnose the P1445 Infiniti code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.
What are Code Possible Symptoms?
Engine Light ON (or Service Engine Soon Warning Light)
What Does the P1445 Infiniti Code Mean?
This system controls flow rate of fuel vapor from the EVAP canister. The opening of the vapor by-pass passage in the EVAP canister purge volume control solenoid valve changes to control the flow rate. The EVAP canister purge volume control solenoid valve repeats ON/OFF operation according to the signal sent from the Engine Control Module (ECM). The opening of the valve varies for optimum engine control. The optimum value stored in the ECM is determined by considering various engine conditions. When the engine is operating, the flow rate of fuel vapor from the EVAP canister is regulated as the air flow changes.
P1445 Infiniti Code - EVAP Canister Purge Volume Control Valve