Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
The cost to diagnose the P1875 code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.
With the engine speed over 450 rpm for 5 seconds, Fuel Cutoff not active, Vehicle Speed Sensor (VSS) input over engine vacuum at 0-105 kPa, gear range is D4, shift solenoid performance counters at zero, Transmission Fluid Temperature (TFT) input from 68-266°F, then Condition 1: 4WD Low switch in 4WD low, transfer case not in 4WD low, Torque Converter Clutch (TCC) slip speed from -3000 to -50 RPM, and VCM detected the speed ratio was 0.8-1.2 (speed ratio is rpm divided by the output speed) Condition 2: 4WD Low switch not in 4WD low, transfer case in 4WD low, TCC commanded on, TCC slip speed was 100 to 3000 RPM, and the VCM detected that the speed ratio was 2.5-2.9 for 10 seconds
Need more information on how to fix the P1875 code? Get Access to Factory Service Manuals
Get the P1875 code diagnosed by a professional: Find a repair shop in your area