P2a00 Nissan - Air Fuel Ratio Sensor Circuit Range/Performance Bank 1 Sensor 1
- Air Fuel Ratio (A/F) Sensor Bank 1 Sensor 1 harness is open or shorted
- Air Fuel Ratio (A/F) Sensor Bank 1 Sensor 1 circuit poor electrical connection
- Fuel pressure
- Fuel injector
- Intake air leaks
The Air Fuel Ratio (A/F) sensor is a planar dual-cell limit current sensor. The sensor element of the A/F sensor is the combination of a Nernst concentration cell (sensor cell) with an oxygen-pump cell, which transports ions. It has a heater in the element.
The sensor is capable of precise measurement λ= 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide range (0.7 < λ < air).
The exhaust gas components diffuse through the diffusion gap at the electrode of the oxygen pump and Nernst concentration cell, where they are brought to thermodynamic balance. An electronic circuit controls the pump current through the oxygen pump cell so that the composition of the exhaust gas in the diffusion gap remains constant at λ = 1. Therefore, the A/F sensor is able to indicate air/fuel ratio by this pumping of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of 700 - 800°C (1,292 - 1,472°F).
P2A00 2008 NISSAN ALTIMA SEDAN
P2A00 2009 NISSAN ALTIMA SEDAN
P2A00 2010 NISSAN ALTIMA SEDAN
P2A00 2011 NISSAN ALTIMA SEDAN
P2A00 2012 NISSAN ALTIMA SEDAN
P2A00 2006 NISSAN MAXIMA
P2A00 2007 NISSAN MAXIMA
P2A00 2009 NISSAN MAXIMA
Any information is appreciated. Thanks